top of page

Metric IEC Motors

Genuine Elektrim IEC motors made in Poland for US export or replacement within imported overseas equipment since 1919.

Genuine Elektrim Motors

To say that metric IEC motors is our passion is an understatement.  We’ve been manufacturing a diverse range of stock and custom metric IEC electric motors built for solid performance in rugged industries for over 100 years for both the US and European marketplaces and beyond. As such, our expertise is practically unrivaled.  

​

When you need IEC motors, look no further than Elektrim.  Elektrim offers three-phase IEC motors in cast iron and aluminum frames, manufactured to the International Electrotechnical Commission (IEC) standards for efficiency and power output, from our US warehouse in 0.08 HP / 0.06 kw to 270 HP / 200 kW, and 2, 4, or 6 pole speed ranges.  We also provide factory-direct custom-designed solutions and local modifications for our IEC motors.

Why work with Elektrim

Large in-stock USA IEC motor inventory

Variety of local modifications available

Many voltage & hertz configurations

Factory-direct expert assistance

Standard and non-standard D & C Flanges

20MFM.png
Low Voltage IEC Motors
0.08 - 270 HP / 0.06 - 200 kW

3PH TEFC 60/50 Hz AC B3 Foot Mounted, B35 D-Flange & B34 C-Face Motors

A full line of low voltage metric iec motors for the domestic US and export market.

In-Stock
40MFV.png
Large Frame Low Voltage IEC Motors from 300 - 1500 HP

3PH TEFC 60/50 Hz AC B3 Foot Mounted

We also manufacture custom large frame low voltage metric IEC motors.

Special Order
20MFM-F.png
Special Order
IEC Metric Motors

As IEC Metric motor specialists, we also offer Metric IEC brake motors, single phase motors, foreign cooling, ATEX and marine duty motors by special order, subject to minimum quantities and lead time.

Special Order

Getting the Right Flange for Your IEC Motor Has Never Been Easier

Elektrim offers a variety of standard and non-standard C & D flanges for in-stock low voltage metric IEC motors.  Order flanges pre-installed on IEC motors or buy separately.

background-whbox.png
In-Stock
Elektrim Standard B5 D-Flange Foot Mounted Motor
IEC-D-Flange-Std.png
Standard IEC Motor B5 D-Flange

Elektrim IEC motors with D-Flange pre-installed are denoted by “MDM” in part number prefix, ex: 20MDM-3-3-18P.

background-whbox.png
In-Stock
Elektrim Reduction B35 D-Flange Foot Mounted Motor
41DM_IECB5-R.png
Reduction IEC Motor B5 D-Flange

Elektrim IEC motors with reduction D-Flange pre-installed are denoted by “MDM” in part number prefix, with "/R" suffix, ex: 20MDM-3-3-18P/R.

background-whbox.png
In-Stock
Elektrim Standard B14 C-Flange Foot Mounted Motor
C-Flange-Kit-Fractional-Metric.png
Standard IEC Motor B14 C-Flange

Elektrim IEC motors with C-Flange pre-installed are denoted by “MCM” in part number prefix, ex: 20MCM-3-3-18P.

background-whbox.png
In-Stock
Elektrim Increased B14 C-Flange Foot Mounted Motor
IEC-C-Flange-1.png
Increased IEC Motor B14/1 C-Flange

Elektrim IEC motors with increased C-Flange pre-installed are denoted by “MCM” in part number prefix, with "/1" suffix, ex: 20MCM-3-3-18P/1.

Elektrim Motors Made in Poland

Made in Poland

Learn more about the unique manufacturing history of genuine Elektrim Motors, proudly manufactured in Poland since 1919.

Ready to reimagine your metric iec motor experience?
bottom of page